EMC-STARTERBOX galvanized | 122160500

EMC Shield Clamps STARTERBOX

Perfect bonding of the cable shield

This case for any EMC eventuality includes fastening for conductor cables and copper cables as well as shield clamps. It will help you to discharge parasitic currents and compensating currents and achieve an equipotential bonding of low impedance. The components can simply be mounted on cables without using tools and provide for an optimal bonding of cable shield. Readjusting the spring pressure is not necessary, because there is a constant pressure on cable shield.

These boxes contain shield clamps for all common shielded cables with diameters from 3 to 16 mm. By means of the modular assembly system, the shield clamps are plugged in during installation to connect with the clips for top-hat rail, direct mounting or bus bar. This system increases flexibility and variety of mounting options, while the number of basic components is reduced.

The EMC STARTERBOX contains the following products:

• 122160001 EmClip® SKHZ 3 - 6 mm (4)
• 122160002 EmClip® SKHZ 6 - 8 mm (4)
• 122160003 EmClip® SKHZ 8 - 11 mm (4)
• 122160004 EmClip® SKHZ 11 - 16 mm (4)
• 122160041 EmClip® SKDZ M4 3 - 6 mm (4)
• 122160042 EmClip® SKDZ M4 6 - 8 mm (4)
• 122160043 EmClip® SKDZ M4 8 - 11 mm (4)
• 122160044 EmClip® SKDZ M4 11 - 16 mm (4)
• 122160081 EmClip® SKSZ 3 - 6 mm (4)
• 122160082 EmClip® SKSZ 6 - 8 mm (4)
• 122160083 EmClip® SKSZ 8 - 11 mm (4)
• 122160084 EmClip® SKSZ 11 - 16 mm (4)
• 122160120 EmClip® MHZ (10)
• 122160122 EmClip® MDZ (10)
• 122160124 EmClip® MSZ (10)
• 122160141 EmClip® MSK 3 - 6 mm (5)
• 122160142 EmClip® MSK 6 - 8 mm (5)
• 122160143 EmClip® MSK 8 - 11 mm (5)
• 122160144 EmClip® MSK 11 - 16 mm (5)
• 122160147 EmClip® MSK+ 3 - 12 mm (5)
• 122160148 EmClip® MSK+ 7 - 18 mm (5)
• 122160090 EmClip® SKSZ Duo 3-6 (1)
• 122160091 EmClip® SKSZ Duo 6-8 (1)
• 122160092 EmClip® SKSZ Duo + 3-12 (1)

All EMClips® shield terminals are solitary available as infrastructure components.