How to make a manual snapshot in the PROFINET-INspektor®
Once you have opened the PROFINET-INspektor® database, go to “Alerts”, select the desired size in the “Snapshot size” box (our recommendation is to leave it at 500), and then click on “Manual snapshot”:
Finally, click on “OK”, and start downloading the desired snapshot.
(Note: In case the 404 error is displayed, you should select a smaller snapshot size, but our recommendation is to leave it at 500).
Keep learning:
PROFINET
PROFINET in the context of Industry 4.0What is PROFINET?
PROFINET Network Planning
ServiceTool
How to use the Indu-Sol ServiceTool to identify the IP of PROFINET devicesPROFINET-INspektor®
How to set PLC as a master in the PROFINET-INspektor®How to configure ports in the PROFINET-INspektor®
How to set-up automatic Switch scanning in the PROFINET-INspektor®
How to set-up automatic topology scanning in the PROFINET-INspektor®
How to get reports and alarms from the web interface of the PROFINET-INspektor®
PROFIBUS
What is PROFIBUS?How to troubleshoot PROFIBUS systems with the PROFIBUS Tester PB-Q ONE