INBLOX® Alarm Module | 124060006

INBLOX® Intelligent PROFIBUS Repeater

Alarm Extension Module

The alarm module comes with four terminals and is capable of monitoring one INBLOX® module per terminal. If available, it is always the last module to be connected and is coupled directly according to a backplane bus. Therefore, no separate voltage supply is needed. Every terminal/ channel has got a switching output for alarms and a reset input. The alarm module can be installed in connection with the E-head only.

In case of alarm, the LED lights up until it is cleared manually according to the web interface or the reset input is actuated. The different LEDs show which INBLOX® module is affected. The web interface of the E-head is used to select the relevant module to show the relevant device and detailed information.

Technical Data

• Connection: 4 screw terminals
• Voltage supply: 24 V with a backplane bus
• Power supply: 0,3 A with a backplane bus

General Data

• Installation: 35 mm DIN top-hat rail
• Dimensions (H x W x D): 114,5 x 22,5 x 99 mm
• Protective system: IP20
• Operating temperature: 5 °C to 55 °C
• Storage temperature: -20 °C to 70 °C