PROFIBUS Diagnostic Connector Axial Fast Connect | 110050008

(No reviews yet) Write a Review

ⓘ Please contact us for partner and OEM pricing here.

Product Info:
Add to Project

PROFIBUS Diagnostic connector axial fast connect

The PG/Service interface serves as a feedback-free measuring point for PROFtest II XL/PROFI-TM Professional and PB-INspektor® NT and can also be used as a programming interface. The plug is completely shielded by the metal-coated casing, and the plug for the terminating resistor is accessible from outside, disconnecting the outgoing segment when in the ON position. The integrated 4 LEDs (Power, TxD, Termination, Error) serve for a quick diagnosis of the bus status. With the Error LED, for example, reflections and missing terminating resistors are signaled. The design meets the Fast Connect requirement.

Bus connection

  • 9-pin sub-D interface
  • Insulation piercing terminal (suitable for Fast Connect cable)
  • Axial cable outlet

Electrical parameters

  • Terminating resistor: integrated, can be switched with a sliding switch from outside
  • Baud rate: 9.6 kbps to 12 Mbps
  • Supply voltage: 4.75 to 5.25 VDC has to be provided by each PROFIBUS user (Pin 5 GND, Pin 6 +5V)
  • Current drain: 10 ... 30 mA
  • Diagnostic display through LED status

Ambient conditions

  • Operating temperature: -20 °C to +75 °C
  • Industrial protection: IP20


  • Dimensions (H x W x D): 34 x 15,8 x 64 mm
  • Interface: 9-pin sub-D
  • Weight: approx. 80 g
  • Casing: zinc die cast
  • Max. fastening torque: 0,02 Nm
Product Info: