PROFIBUS Cable + FE Solid | 110070017

PROFIBUS cable ⁺FE Solid

The PROFIBUS cable +FE solid is a solid data cable for transmission of analog and digital signals on cabling according to PROFIBUS standard in mechanical engineering. The inner jacket as fast connect version and the double shield braiding ensures maximum shielding values.

The cables of the product series +FE are developed to run a cable in strongly EMC contaminated environments. The shield relief line fixed around the standard fieldbus cable implements the two features of an additional shield in an EMC contaminated environment and an additional functional equipotential bonding.

Construction

• Conductor: AWG 24/1, bare
• Insulation: FS-PE
• Diameter: 2,50 ± 0,05 mm
• Inner jacket: Special PVC
• Shielding total: Plastic laminated Aluminum foil
• Inner/outer screen:
  • Copper, wire 0,10
  • Optical coverage > 80%
  • Shielding braid of V2A on request
• Screen section: > 1,5 mm²
• Carrying capacity: max. 10 A
(outer screen):
• Jacket: Special PVC
• Colour: Violett, RAL 4001
• Diameter: 8,2 ± 0,2 mm

Electrical data

• Loop resistance: max. 115 Ohm/km according to VDE 0812
• Insulation resistance: min. 5 GOhm x km at +20°C
• Operating capacity: nom. 30nF/km
• Test voltage: 1000 V/DC
• Work voltage: 100 V
• Screen resistance: < 9,5 mOhm/m
• Transfer impedance: < 15 mOhm/mat 10MHz

Mechanical data